Free Shipping on U.S. Orders Over $100 | 10% Off Entire Order On International Orders Over $150


Your Cart is Empty


8:1 Clear Urethane Katz-Moses Magnetic Dovetail Jig and 90 Degree Crosscut Guide NOW WITH BIGGER STRONGER MAGNETS

**Brand New Stronger 5mmx10mm Neodymium Magnets**

**CNC Dovetail Alignment Boards Now Available in the Store**

  • Pins

  • Tails

  • Shoulders

  • 90 Degree Crosscut Guide

  • Clear so you can see your lines through the jig

  • 8:1 is typically used for hardwoods

  • Comes with a KM Tools Sticker

Guides you through all the Dovetail Steps with ease and accuracy, while cutting the learning curve substantially. The Katz-Moses Magnetic Dovetail jig is made in a mold from a virtually indestructible clear polyurethane for years of use. This is the same material used to make pool balls so you know how strong the jig is. It is then laser etched on the top and bottom for clean and easy to read labeling. The magnets have 10 lbs of pulling pressure to hold your saw firm to the jig. It also functions as a 90 degree crosscut guide which is a unique feature to the Katz-Moses Magnetic Dovetail Jig. 

Check out these  videos where I use it to make all sorts of cool dovetails :

Inlaid Dovetails with David Picciuto:

Cutting Dovetails Tips and Tricks with David Picciuto:



Customer Reviews
4.9 Based on 85 Reviews
5 ★
4 ★
3 ★
2 ★
1 ★
Customer Photos
97reviewers would recommend this product Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
    Richard W.
    United States
    I recommend this product

    Dovetail asdist

    The dovetail jig made my first dovetails so well I’m keeping the box I made using it for show!

    Carl S.
    United States United States
    I recommend this product

    Good results the very first time.

    This jig allowed me to get great cuts my very first time dovetailing. Unfortunately there isn’t a jig for the chiseling part of the process. That’s where I got a big gap. But the saw cuts were great. My tails board was the end of a kerf cut curve so it was not a good flat 90 degree face. But thanks to this jig and the saw and marking gauge I got from KM it made an advanced joint possible on my first try. Just had to put a little epoxy in there to fill the sloppy chisel work.

    Simon S.
    United Kingdom United Kingdom
    I recommend this product

    Great bit of kit, slightly concerned about longevity

    Overall I’m really happy with this. It’s allowed me to cut dovetails much more accurately than I could have before, and greatly reduced the stress of a large build. That said, I was surprised by how quickly the material scuffs, and it I don’t know whether that’s going to be purely cosmetic, or whether it’s possible that it might wear unevenly over time and will need replacing.

    John E.
    United States United States
    I recommend this product

    Dovetail jig

    Need to look at this more but it seems the engraved wording on the top of the jig and the shape of the post are not in agreement. 90* engraving gives a angled reference on the post for example. Wondering if this one may have slipped through QC and marked wrong. I’d like to discuss this with someone but there is no phone number to call with. The product has potential but until we figure out what’s going on I cannot reccomenc it. Feel free to call me John Edwards

    Joseph S.
    United States United States
    I recommend this product

    Perfect on the first try!

    I’m really pleased with my KM saw guide. I’m a weekend woodworker and don’t cut them often enough for good muscle memory. I’ve only been able to get good results with a bandsaw jig in the past. This is much more satisfying to use, quieter, and faster too! I highly recommend this jig. I used mine with a western style saw. I haven’t tried with a Japanese saw yet but will be buying one soon.