Free Shipping on U.S. Orders Over $100 | Worldwide over $125-$150 To Most Countries

0

Your Cart is Empty

6:1 Clear Urethane Katz-Moses Magnetic Dovetail Jig and 90 Degree Crosscut Guide NOW WITH BIGGER STRONGER MAGNETS

**Brand New Stronger 5mmx10mm Neodymium Magnets**

**CNC Dovetail Alignment Boards Now Available in the Store**

  • Pins

  • Tails

  • Shoulders

  • 90 Degree Crosscut Guide

  • Clear so you can see your lines through the jig

  • 6:1 is typically used for softwoods

  • Comes with a KM Tools Sticker

Guides you through all the Dovetail Steps with ease and accuracy, while cutting the learning curve substantially. The Katz-Moses Magnetic Dovetail jig is made in a mold from a virtually indestructible clear polyurethane for years of use. This is the same material used to make pool balls so you know how strong the jig is. It is then laser etched on the top and bottom for clean and easy to read labeling. The magnets have 10 lbs of pulling pressure to hold your saw firm to the jig. It also functions as a 90 degree crosscut guide which is a unique feature to the Katz-Moses Magnetic Dovetail Jig. 

Check out these videos where I use it to make all sorts of cool dovetails :

Inlaid Dovetails with David Picciuto: https://www.youtube.com/watch?v=mutzoCJuhyw&t=812s

Cutting Dovetails Tips and Tricks with David Picciuto: https://www.youtube.com/watch?v=i8KPSNcpQjU&t=125s

 

 

Customer Reviews
4.9 Based on 89 Reviews
5 ★
93% 
83
4 ★
7% 
6
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Customer Photos
98reviewers would recommend this product Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
    A
    09/24/2022
    Anonymous
    Canada
    I recommend this product

    Dove tail gig

    Excellent product …very well designed

    A
    09/19/2022
    Anonymous
    United States United States
    I recommend this product

    Good tool

    This is a great tool. Helped with my issue of not being able to keep the saw straight. Lovely experience.

    LS
    09/13/2022
    Louis S.
    United States United States
    I recommend this product

    Early success

    Awesome product. I don’t think I’m going to need to buy it again. Well-made. A little bit of time invested on how to use it. I have some early successes on my dovetails.I am no experienced fine wood worker by any measure. This tool works and was well thought out.

    A
    09/07/2022
    Anonymous
    United States United States
    I recommend this product

    Worth every penny

    This jig works almost perfectly. I added 600 grit sandpaper with double sided tape to the post part of the jig to prevent slipping. I have always cut dovetails without a jig with good results, but this jig definitely helps with accuracy- especially when doing multiple dovetails on a carcass.

    KM Tools 6:1 Clear Urethane Katz-Moses Magnetic Dovetail Jig and 90 Degree Crosscut Guide NOW WITH BIGGER STRONGER MAGNETS Review
    SB
    08/26/2022
    Simeon B.
    United States United States
    I recommend this product

    Katz Moses 6:1 Dovetail guide

    This is a very well made guide. There are a few different dovetail guides out there but this one is hands down the best. Starting your cuts square and and maintaining squareness through out the cut is a must for tight fitting dovetails. Also Jonathan does a lot for the woodworking world and I love watching his videos. So I wanted to support what he is doing. Next on the list is the is the fence stop. That is also the best out there. There is no deflection in the Katz Moses stop. And I cannot say the same about the others I have tried. Keep it up Jon. Loyal KM supporter and occasional sawdust maker.