Ideal for trim routers and router tables, 1/4″ diameter gets into tight curves! Get all three 1/4" flush trim bits and save!
- Astra Coated
- Solid Carbide
- Compression Cut
- Up-Cut
- Down-Cut
- Shank: 1/4″
- Cut Length: 1″
- Overall Length: 3″
- Double Bearings
- Made In USA
These tools are coated with a proprietary high performance *Astra coating* that allows higher speed & feed rates as well as 2x the extended tool life & increased lubricity in abrasive material
Jonathan's Hot Take:
Downcut spiral bits are my most used bit when I want a clean edge on the tool-side of my stock.
They're great for stopped mortises, grooves, and dados — and also for hogging out material on the CNC.
These bits provide the HIGHEST VALUE because the Astra Coating makes them last at least 2-4x longer than uncoated bits. This is one of those times that spending a little more upfront saves you a lot of money down the line.
Spiral bits perform 100x better and 100x longer than straight bits. I recommend staying away from straight bits in general, because they dull so much faster and their aggressive cutting profile can be much less safe.
Check out the video in additional resources for more info.