Free Shipping on U.S. Orders Over $100 | Worldwide over $125-$150 To Most Countries

0

Your Cart is Empty

1/4" Flush Trim 3 Pack *Astra Coated*

Ideal for trim routers and router tables, 1/4″ diameter gets into tight curves! Get all three 1/4" flush trim bits and save!

  • Astra Coated
  • Solid Carbide
  • Compression Cut
  • Up-Cut
  • Down-Cut
  • Shank: 1/4″
  • Cut Length: 1″
  • Overall Length: 3″
  • Double Bearings
  • Made In USA

These tools are coated with a proprietary high performance *Astra coating* that allows higher speed & feed rates as well as 2x the extended tool life & increased lubricity in abrasive material

Jonathan's Hot Take:

Downcut spiral bits are my most used bit when I want a clean edge on the tool-side of my stock.

They're great for stopped mortises, grooves, and dados — and also for hogging out material on the CNC.

These bits provide the HIGHEST VALUE because the Astra Coating makes them last at least 2-4x longer than uncoated bits. This is one of those times that spending a little more upfront saves you a lot of money down the line.

Spiral bits perform 100x better and 100x longer than straight bits. I recommend staying away from straight bits in general, because they dull so much faster and their aggressive cutting profile can be much less safe.

Check out the video in additional resources for more info.

This three pack consists of every 1/4" flush trim bit you could ever want. These are great for getting into tight turns and have a spiral for every occasion.

  • 1/4" Compression Flush Trim Bit *Astra Coated* - 425-CM250FT
  • 1/4" DownCut Flush Trim *Astra Coated*- 425-DNC250FT
  • 1/4" UpCut Flush Trim *Astra Coated* - 425-SRF250FT

Made in the USA by KM Tools

Customer Reviews
5.0 Based on 1 Reviews
5 ★
100% 
1
4 ★
0% 
0
3 ★
0% 
0
2 ★
0% 
0
1 ★
0% 
0
Write a Review Ask a Question

Thank you for submitting a review!

Your input is very much appreciated. Share it with your friends so they can enjoy it too!

Filter Reviews:
    RW
    04/23/2022
    Ray W.
    Australia
    I recommend this product

    3 Piece Flush Trim Bits

    Very smooth cuts. I use Merbau which tends to splinter a lot even going with the grain. Got a nice clean cut with all of these bits.