1/4″ Down-Cut Spiral Bit *AstraHP Coated*
1/4″ Down-Cut Spiral Bit *AstraHP Coated*

1/4″ Down-Cut Spiral Bit *AstraHP Coated*

Sale price$32.50
Sold out

A must-have in your CNC tool arsenal, the 1/4″ down-cut spiral produces smooth, clean cuts with minimal chip-out or edge fraying!

  • Astra Coated
  • Solid Carbide
  • Tip diameter: 1/4″ (.25″)
  • Shank Diameter: 1/4″ (.25″)
  • Length of cut: 1″
  • Overall Length: 2-1/2″
  • Made in USA

These tools are coated with a proprietary high performance *Astra coating* that allows higher speed & feed rates as well as 2x the extended tool life & increased lubricity in abrasive material

Jonathan's Hot Take:

Downcut spiral bits are my most used bit when I want a clean edge on the tool-side of my stock.

They're great for stopped mortises, grooves, and dados — and also for hogging out material on the CNC.

These bits provide the HIGHEST VALUE because the Astra Coating makes them last at least 2-4x longer than uncoated bits. This is one of those times that spending a little more upfront saves you a lot of money down the line.

Spiral bits perform 100x better and 100x longer than straight bits. I recommend staying away from straight bits in general, because they dull so much faster and their aggressive cutting profile can be much less safe.

Check out the video in additional resources for more info.