1/4" Up-Cut Flush Trim *AstraHP Coated*
1/4" Up-Cut Flush Trim *AstraHP Coated*
1/4" Up-Cut Flush Trim *AstraHP Coated*

1/4" Up-Cut Flush Trim *AstraHP Coated*

Sale price$49.00
Sold out

Ideal for trim routers and router tables, 1/4″ diameter gets into tight curves!

  • Astra Coated
  • Solid Carbide
  • Up-Cut
  • Shank: 1/4″
  • Cut Length: 1″
  • Overall Length: 3″
  • Double Bearings
  • Made In USA

These tools are coated with a proprietary high performance *Astra coating* that allows higher speed & feed rates as well as 2x the extended tool life & increased lubricity in abrasive material

Jonathan's Hot Take:

Up-Cut spiral flush trim bits are my most used bits when I'm trying get a clean bottom edge or the edge furthest from the cutting tool.These are great for getting into tight turns.

Typically, companies have had a tough time making a flush trim bit this size because of the bearing limitations. Bits&Bits and I came up with these special bearings to combat that problem.

These bits provide the HIGHEST VALUE because the Astra Coating makes them last at least 2-4x longer than uncoated bits. This is one of those times that spending a little more upfront saves you a lot of money down the line.

Spiral bits perform 100x better and 100x longer than straight bits. I recommend staying away from straight bits in general, because they dull so much faster and their aggressive cutting profile can be much less safe.

Check out the video in additional resources for more info.