













Sharpening Starter Set
Choose options
Everything you need to get a razor edge on any chisel or plane iron, in one box. The Katz-Moses Universal Sharpening Jig holds the blade at a repeatable angle, and the Zen-Wu ZenSharp system gives you the speed of water stones with the durability of diamond. Choose the ZenSharp Starter Kit or the Pro Kit, and save when you bundle.
What's included
- 1x Katz-Moses Universal Sharpening Jig
- 1x Zen-Wu ZenSharp Kit (your choice of Starter or Pro)
- FREE bonus: printable STL file for a sharpening jig carrying case
Choose your ZenSharp Kit
|
Starter Kit |
Pro Kit |
|---|---|
|
ZenSharp Base |
Everything in the Starter Kit, plus: |
|
45μm Coarse Diamond Card |
60μm Ultra-Durable Coarse Diamond Card (steel substrate) |
|
20μm Medium Diamond Card |
3μm Ultra-Fine Diamond Card |
|
9μm Fine Diamond Card |
Kangaroo Leather Strop Card (compound free) |
|
Ultra-Fine Strop Card (compound infused) |
|
|
Maple Card Holder |
|
|
Magic Eraser (x2) |
|
The Pro Kit is built for professional chefs and industrial use. For chisels and plane irons, the Starter Kit's Fine card already gives you a mirror finish.
Katz-Moses Universal Sharpening Jig
Sharpen virtually any width chisel or plane iron, skewed or straight edged, without cumbersome attachments. This jig embodies our motto, innovation through simplicity: repeatable results with every blade, every angle, every time.
- A removable magnetic fence sets common edge angles like 90°, 45° and 35°, and doubles as a fulcrum for setting up repeatable angles on any skewed blade.
- Two built-in shelves on the swing arm make it simple to set a bevel at 25° or 30°. A clip-on attachment registers angles between 20° and 35° **.
- Thumb registers and brass thumb screws give you the most ergonomic grip of any sharpening jig out there, and the wide brass roller keeps the jig from tilting.
To get started, watch Jonathan's video or download the printable PDF instructions.
Zen-Wu ZenSharp System
A precision-milled magnetic base accepts interchangeable ZenSharp Cards, each plated with a specific diamond grit or strop material. The base is heat treated three times for lifetime flatness and has six legs for the kind of flat precision you find on $100,000+ CNCs. Cards snap in and out for quick changes and compact storage.
Spray the card with a light mist of water or glass cleaner, and get a razor edge in seconds. When a card wears out, replace it for a fraction of the cost of a new diamond stone.
Specifications
Sharpening Jig
- Fits chisels and plane irons, skew chisels and plane blades up to 45°, and irregular blades like fish tail chisels and rabbeting plane blades
- Blade width: 1/16" to 2 ⅝" (fits a #8 plane blade)
- Blade thickness: up to .4"
- Positive fence stops: 35°, 45° and 90°
- Main fence stops: 25° and 30°
- Auxiliary fence stops: 20°–32° (in some cases up to 35° **)
ZenSharp base
- Length: 7.75"
- Width: 3"
- Card grits: Coarse 45μm, Medium 20μm, Fine 9μm, Ultra-Fine 3μm (Pro Kit)
**NOTE: Anything beyond 32° depends on the geometry of the blade. You won't often have to sharpen at these angles.
Jonathan's Hot Take
This is the sharpening setup I wish I'd had years ago. I was so tired of the fiddly setup required with other sharpening jigs, plus all the goofy attachments for trying to sharpen a skew or small chisel. With this jig, I can sharpen the narrowest chisels out there, and the wide roller makes it just as easy to sharpen wider blades like plane irons.
Pair it with ZenSharp, and nothing else even comes close on cost and quality. The diamond cards will sharpen your tools hundreds of times before wearing out, and they're the exact same stones Zen-Wu uses in their factory to sharpen their chisels. The interchangeable magnetic plates are incredibly convenient, especially in a small shop. I wish I had these when I was working out of my shed.
If you're tired of wasting time on sharpening and want to get back to making cool sh*t, this is the set.
FAQ
How long will the cards last? Hundreds of tool sharpenings, while staying flat and true.
Do I need the Pro Kit? Not for woodworking. The Fine card is enough for a mirror finish; the Pro Kit's Ultra-Fine card is for sushi-level edges and heavy professional use.
Should I lubricate the cards? Yes, a spritz of water or glass cleaner (Windex works) so the card isn't dry. Dry the cards thoroughly afterward so filings left behind don't rust.
Need help? Reach our team at support@kmtools.com.







